Custom Logo Patches: Your Mark, Translated Into Cloth
No minimum order
- No minimum order. One patch is a real order.
- First digital proof in 24 hours, one revision included
- No setup or digitizing fees
- Rough artwork is fine. We redraw it.
A logo was designed for a screen or a page, where it can be any size and any number of colors. A patch is a physical object with a fixed size and a construction that has real limits. Most of the work on this page is the translation between those two things, and it happens before anyone picks a material.
Three parts of a logo cause almost all the trouble. Small type, usually a tagline or a wordmark under the symbol. Gradients and soft shadows, which several constructions cannot reproduce at all. And precise brand colors, which get matched as closely as the available range allows rather than exactly. None of these is a reason not to make the patch. All of them are reasons to decide the finished size first, because size is what determines whether the rest survives.
Not every logo has to become cloth in the same way either. A brand often needs the primary badge on a garment, a simplified die-cut version for gear, and a small version for a cap or a label, and those are three different patches from one mark rather than the same file scaled three ways. Tell us every placement you have in mind and we will plan them together.
What brands order
Four versions of one mark
Most brand orders are more than one patch, because one placement rarely covers everything a mark has to appear on. These four are the versions we make most often from a single logo.
04Common orders
Embroidered Patches for Brand Badges
The full logo reproduced as faithfully as the construction allows, usually for a chest placement or a bag. This is the version where small type and color accuracy matter most, so it gets the most attention at proof stage. Send the artwork at the size you actually want it made and tell us the smallest point size in it, because that number decides more than the material does.
View Embroidered Patches page
PVC Patches for Molded Custom Shapes
The mark reduced to its outline, made so the patch is the shape rather than a circle with art inside it. There are three ways to get the shape. Molded PVC takes its outline from the mold, so even complex silhouettes are straightforward and the piece wipes clean. An embroidered design can be cut to its outline with a laser or hot-cut edge that seals as it cuts, keeping thread texture while following tight curves a merrow border cannot travel. Leather is laser-cut to shape with the mark debossed or engraved inside. It works best when the logo has a strong silhouette and worst when the mark depends on internal detail, so the proof shows the cut line and any simplification before you commit. Narrow points are softened slightly where the piece is sewn, and where a silhouette would cost the mark too much we will suggest a bordered shape instead.
View PVC Patches page
Woven Patches for Small-Type Logos
When the logo has to appear small, on a cap panel, a sleeve or a label, the tagline usually has to go. That is a design decision rather than a production failure, and it is better made deliberately than discovered on the proof. We will tell you where the type gives out at your size and propose what to drop rather than shrinking everything until nothing reads.
View Woven Patches page
Velcro Patches for Removable Brand Badges
Where the same garment or bag carries different marks at different times, or a customer wants to swap them, the badge goes on hook-and-loop rather than being fixed. That means the loop field on the product sets the finished size, so send that measurement. It also means the patch is a separate sellable item, which some brands prefer.
View Velcro Patches page
2″
Where small type gives out
Around two inches is where most logos start losing their smallest elements, which makes it a useful figure to have in mind rather than a limit. Below it, taglines, registered marks and thin outlines all begin to close up, and which one fails first depends on the letterform rather than the size alone. Send the artwork at the finished size you want and we will tell you what survives.
Above that, size is set by the placement rather than by the logo. Measure the panel the patch has to sit on, whether that is a chest, a cap front, a sleeve or a bag, and work back from it. A mark that needs three inches to stay readable and a placement that offers two is a real conflict, and the honest resolutions are a simplified version or a different construction.
When the mark carries small type or a tagline, choose woven patches for fine detail. For a bold mark with thread texture on a garment, choose custom embroidered patches. For a die-cut silhouette or a badge that lives on gear, choose molded PVC patches.
How a mark becomes a patch
Three translations that have to happen
Every logo goes through the same three checks before a construction is chosen. None of them is a matter of taste, and all three are settled on the proof rather than discovered after the run.
Type at the finished size
We check the smallest lettering at the size the patch will actually be, not at the size the file opens at. Where it does not hold, we propose what to drop rather than shrinking everything until the whole mark reads as a smudge.
Gradients, resolved
Molded and thread constructions build color from discrete areas, so shading has to be rebuilt as flat color. Printing is the exception and reproduces tone directly. We show you the redraw before you approve it, not afterward.
Color, matched not guaranteed
Brand colors are matched as closely as the available thread or material range allows and shown on the proof. We do not claim an exact Pantone match on any construction, because that is not something a dyed thread range can promise.
Send the mark and the placement
Give us the logo, the finished size you want and where it is going. We will tell you what survives at that size, which construction suits it, and what a simplified version would need to lose. We send a digital proof within 24 hours before anything is stitched.
What the order involves
Specifications
Everything you need to know before ordering your custom logo patches.
- Size range
Set by the placement the patch has to sit on. Around 2 inches is where most logos start losing their smallest elements
- Colors
Set by the construction you choose and confirmed on the proof
- Backing options
Chosen against the product the badge lives on. Removable brand badges use a hook face sized to your loop field
- Color handling
Matched as closely as the available range allows and shown on the proof. No exact Pantone match is claimed
- No minimum order
- 14–16 Days
- Standard delivery
- Free first proof
- Free US shipping
Order as few or as many as you need.
The figure the quote is written against.
One revision included. Nothing is made until you approve it.
Worldwide shipping quoted per destination.
Quality craftsmanship. Fast turnaround. Zero hidden fees.
How It Compares
vs. Woven instead of embroidered
This is the comparison that decides most logo orders. Woven holds lettering down to around 2 mm where the letterform allows, which is usually what a tagline needs. Embroidery gives thread texture and a traditional patch look but closes up fine type sooner. If the mark is a symbol with no small type, embroidery usually wins on appearance. If there is a wordmark, woven usually wins on legibility.
Woven when the mark has small type. Embroidery when it does not.
vs. Printing for a complex mark
Where the logo has gradients, a photographic element or a color count that would be painful in thread, printing reproduces it as designed rather than asking a brand team to approve a simplified version. What it gives up is texture: the surface is smooth with no relief. For marks built on modern gradient work, that trade is usually worth making.
Printing for gradients and high color counts. Thread when texture is part of the point.
vs. A patch or something else entirely
Not every logo belongs on cloth. A sewn-in woven label suits a garment brand better than an external patch, and a metal pin suits merchandise and awards better than either. We make all three, so it is worth deciding what the object is for before deciding what it is made of.
Patch for an external emblem. Label for inside a garment. Pin for merchandise and awards.
Before you send the logo
Worth reading first
Woven vs Embroidered Patches
The comparison that settles most logo orders, since a wordmark is usually what forces the construction choice.
READ MORE
How to Design a Custom Patch
The artwork workflow that turns a screen logo into a manufacturable design at a fixed finished size.
READ MORE
Planning Patches for a Team
Useful if the logo order is part of a wider program across staff, teams or merchandise rather than a single patch.
READ MOREOur process
The complete order sequence
Six stages. Three need action from you. Liberty Patches handles the rest.
for a brighter
tomorrow.
Before production
Your input helps Liberty Patches get every detail right.
- You
Share the brief
Artwork in whatever state it is in, the quantity, finished size, placement and date needed. There is no minimum.
- Liberty Patches
Review construction
Liberty Patches checks the design against the construction, redraws rough artwork, and includes vector conversion or digitizing with a patch order.
- You
Confirm the quote
The quote confirms size, construction, backing and quantity. Valid for 14 days. A quote is a price, not a commitment.
- You
Approve the proof
A digital proof shows size, colors, border and backing. Nothing is made before approval.
Production starts after this approval.
After approval
Liberty Patches handles the rest.
- Liberty Patches
Produce and inspect
Production follows approval and payment. The first piece is checked before the rest continues, and every piece is inspected afterward.
- Liberty Patches
Dispatch and receive
Finished patches are packed and shipped by UPS or FedEx. Tracking is sent by email or SMS where available.
